+- +-

Advertisement

Accommodation Options

With everything there is to see and do in and around Big Bend National Park, the area has become one of the most cherished family-friendly vacation destinations in Texas. Lodging options are abundant, ranging from rustic to luxurious. Whether your family would prefer a campground, an authentic Texas ranch, a resort hotel or a vacation rental, you're sure to find it here. There are also plenty of timeshare resales and vacation homes for sale, for those interested in becoming an avid Bender!

Copyright Notice

All photographs and content posted by members are to be considered copyrighted by their respective owners and may not be used for any purposes, commercial or otherwise, without permission.

Author Topic: Appropriate Tires for 4WD Roads  (Read 845 times)  Share 

Offline Alto Relex

  • Roadrunner
  • *
  • Posts: 46
Appropriate Tires for 4WD Roads
« on: March 11, 2010, 11:58:08 AM »
I am about to take the family to BBRSP for the first time in a week or so.  My 4x4 4Runner has Michelin LTX A/T tires on it which are supposedly designed for all terrain, but I'm not clear if they are suitable for the roads out here.  I've driven on the Old Ore Road, the River Road and Glenn Springs with no problems.  The rangers at BBRSP are telling me you need at least 6 ply tires out there.  I can't seem to find 6 ply tires though--looks like even the most expensive Michelins are 2 ply steel + 2 ply polyester. 

So should I be alright with these tires, driving the same as I do at BiBe?  Or is there some other tire I need to get and if so what's an example?  I never thought shopping online for tires would be this confusing.  Thanks, everyone!

Offline tvc15

  • Roadrunner
  • *
  • Posts: 79
  • Primate in polyester
Re: Appropriate Tires for 4WD Roads
« Reply #1 on: March 11, 2010, 12:18:49 PM »
The short answer is: look for tires with an "LT" designation. That is, LT245/75R16, as opposed to P245/75R16.

Check the load range designation.
C = 6 ply
D = 8 ply
E = 10 ply
« Last Edit: August 20, 2011, 11:55:58 PM by tvc15 »

Offline bdann

  • Creosote
  • Mountain Lion
  • *
  • Posts: 1818
Re: Appropriate Tires for 4WD Roads
« Reply #2 on: March 11, 2010, 01:01:52 PM »
Also important to note that modern load range designations do not indicate an actual number of ply layers.  So, load range "C" doesn't mean it has 6 plys.  It just means it has the equivalent strength of 6 ply layers in an old school bias ply tire. 

More info: http://www.tirerack.com/tires/tiretech/techpage.jsp?techid=55
WATER, It does a body good.

Offline 04LJ

  • Coyote
  • *
  • Posts: 72
Re: Appropriate Tires for 4WD Roads
« Reply #3 on: March 11, 2010, 07:47:13 PM »
It's my understanding the the State park roads get NO maintenance. and are more like 2 track trails in spots , than roads.
Slightly modified 04 Jeep LJ
Gadget Junkie
KE5PPH

Offline rgibson

  • Coyote
  • *
  • Posts: 165
Re: Appropriate Tires for 4WD Roads
« Reply #4 on: March 11, 2010, 09:07:17 PM »
Have run nothing but Michelin LTX or XPS (steel cord also on the side wall) on SUV's and Pickups for a # of years.  Have at least 500,000 plus miles on them.  On the 15" tires for SUV's, one must go to an LT (Light Truck) to get 6 ply (C rating)

On the 16" tires I run 10 ply or the (E rating).  The XPS (steel side walls) are more than the LTX, but there are alot of sidewall punctures in the BB.

Not one flat since going totally Michelin.  This includes alot of  mighty bad roads in the Big Bend and Chihuahua.  They are worth the money for lasting (60k plus) and also no flats.  I still can not get out of the old habit of carrying two spares, just in case.

Discount Tire seems to usually have the best prices.





Offline Alto Relex

  • Roadrunner
  • *
  • Posts: 46
Re: Appropriate Tires for 4WD Roads
« Reply #5 on: March 11, 2010, 10:34:34 PM »
Have run nothing but Michelin LTX or XPS (steel cord also on the side wall) on SUV's and Pickups for a # of years.  Have at least 500,000 plus miles on them.  On the 15" tires for SUV's, one must go to an LT (Light Truck) to get 6 ply (C rating)

On the 16" tires I run 10 ply or the (E rating).  The XPS (steel side walls) are more than the LTX, but there are alot of sidewall punctures in the BB.

Not one flat since going totally Michelin.  This includes alot of  mighty bad roads in the Big Bend and Chihuahua.  They are worth the money for lasting (60k plus) and also no flats.  I still can not get out of the old habit of carrying two spares, just in case.

Discount Tire seems to usually have the best prices.






RGibson, thanks.  Makes me feel much better about the LTXs I have on there now.  Sounds like I just need to slap another LTX on the spare, and another for the "spare spare".   

Offline Al

  • Dog Face Moth
  • Mountain Lion
  • *
  • Posts: 3460
Re: Appropriate Tires for 4WD Roads
« Reply #6 on: March 11, 2010, 10:49:06 PM »
LTX's are great tires and a big step up from what I use. I have run Avon tyres, from Tirerack, for the last several years including my Big Bend trips and haven't had a flat . . . yet.  Knock on wood! I am thinking of replacing them only because any tire past 6 years old can get brittle and start to crack on you.

Al
« Last Edit: March 11, 2010, 11:03:30 PM by Al »

 

Advertisement

Looking to plan an adventurous trip at the Big Bend National Park but have a distracting timeshare on the brain? Free yourself from the stress of trying to sell timeshares or cancel timeshares. The professionals at Transfer America will have you enjoying the entire Big Bend Region in Texas before you know it.

Advertisement